5) Stainless-Steel Button
With illuminated LED ring (at night)
6) Microphone
With active noise cancellation
7) Light sensor and Diagnostic-LED
For the night-vision mode. The Diagnostic-LED is located behind the Light sensor.
Video doorbell - back
1) Locking positions
For the mounting plate
2) Connection terminal
For the power supply, door chime, etc.
3) Screw opening
For the safety screw
Videos
Need help with the installation? Be sure to watch our installation videos which can be found on
http://www.doorbird.com/support
Each individual step of the installation is clearly documented in the videos.
Installation
All the steps below should be carried out carefully by a competent adult, taking into consideration
any applicable safety regulations. Should you have any questions, please contact us or a competent
specialist directly. Please ensure that all wires used for the installation are undamaged along their
entire length and approved for this type of use.
Network speed and network components
Please ensure that the upload speed of your Internet connection is at least 0.384 Mbps. You can also
carry out a speed test at any time via the DoorBird app. The DoorBird user experience is only as good
as your network speed, network stability and quality of your network components, such as your
Internet router and Wi-Fi access points or Wi-Fi repeaters. Please also make sure that your network
2