Time Setting - Bresser Jumbo LCD Bedienungsanleitung

Parts overview (Fig. 2)
Wall clock (Fig. 2)
1. Weekday
2. Symbol for Day
3. Current date
4. Symbol for Month
5. Symbol for daylight saving time
6. Symnol for RCC signal reception
7. Current time
8. Symbol for AM/PM
9. Wall mount
10. UP button
11. TIME SET button
12. DOWN button
13. RESET button
14. Battery compartment
15. Stand (fold out)
Getting started/Power supply
NOTE!
Before operating the device or when replacing the
batteries, make sure to place the batteries strictly
according to the right polarities (+/-) as shown in
the battery compartment.
1. Remove the cover from the wall clock battery
compartment (14).
2. Insert the batteries (4x 1.5V, AA/LR6) into bat-
tery compartment (14).

Time setting

NOTE!
After the clock received the DCF time signal the
time will be set according to the Central Europe-
an time (CET). Summer and winter time change
(and reverse) is also set automatically. Other de-
viating times can be set manually only.
GB
7