packaging until required for use.
v) Observe the plus (+) and minus (–) marks on
the battery and ensure correct use.
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Wear ear protection
Wear eye protection
Wear dust mask
Batteries may enter water cycle if
disposed improperly, which can be
hazardous for ecosystem. Do not dispose
of waste batteries as unsorted municipal
waste.
8
Do not burn
Li-Ion battery This product has been
marked with a symbol relating to
'separate collection' for all battery
packs and battery pack. It will then
be recycled or dismantled in order to
reduce the impact on the environment.
Battery packs can be hazardous for the
environment and for human health since
they contain hazardous substances.
Waste electrical products must not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice.
COMPONENT LIST
1. ON/OFF SWITCH
2. BATTERY RELEASE BUTTON *
3. BATTERY PACK *
4. HANDLE
20V Cordless Orbital Buffer
5. FOAM PAD
6. ELASTIC APPLICATOR BONNET
(TERRY CLOTH BONNET)
7. ELASTIC BUFFING BONNET
(WOOL BONNET)
* Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
WX856 WX856.X
Type Designation:
(856-designation of machinery, representative
of Polisher)
Voltage
No load speed
Run time
Base plate size
Machine weight
(bare tool)
** X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models
*** Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
NOISE INFORMATION
A weighted sound pressure
K
pA
A weighted sound power
K
wA
Wear ear protection
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN 62841:
Vibration emission value:
WX856
WX856.X**
20V
Max***
3000r/min
40min
254mm
2.0kg
L
= 73.2dB(A)
pA
3dB(A)
L
= 84.2dB(A)
wA
3dB(A)
a
= 3.904m/s
h
Uncertainty K = 1.5m/s²
EN
2