SPINEL Pinocchio Bedienungsanleitung Seite 16

ADJUSTMENT OF THE POD HOLDER
During the test stage, the top pod holder is correctly set in the factory.
If, when delivering coffee, you should notice leaking from between the two pod holders, then the
top holder needs to be manually adjusted as follows:
IMPORTANT: only carry out pod holder adjustments and replacements when the machine
has cooled.
Open the pod holder, insert a 4mm diameter lever in the appropriate hole of the upper pod holder;
- turning to the left will increase the tightness.
- turning to the right will decrease the tightness.
For adjustment purposes, never move the pod holder away from the upper surface too much (do
not loosen by more than ¾)
If a tighter closure is necessary, operate on the bottom pod holder
- tightening strenght
+ tightening strenght
16 Spinel S.r.l.