Bresser WIFI ClearView Weather Station 7in1 Bedienungsanleitung Seite 13

1
1 Stable: Stable: The base station is connected
to the WIFI router
3 (6-7) will flash. Console currently in Access
Point (AP) mode
3. Once you are successfully connected, open your Internet browser and enter the address
192.168.1.1 in the URL field.
4. Now enter your router data (SSID of your home WIFI router) and weather service data (station ID /
station key) and select the service for automatic time transmission.
1 Select 'ADVANCED' to enter the advanced
settings menu
3 Select 'Search' to search for routers
5 Select WIFI router (SSID)
7 Select the security type of the router (usually
WAP2) WAP2)
9 Enter 'Station ID' and 'Station key' registered
with Wunderground*
11 Add another weather service (e.g. AWEKAS).
13 Select time server
15 Enter latitude
17 Select the direction (e.g. for EU countries the
longitude is "East" and for the USA it is
"West")
19 Press to complete the setting
Leave field blank if registration is not yet available and entries are to be made later.
**Manual setup requires additional router information (including e.g. IP address, SSID, etc)
WIFI requirements:
5. Supported devices: Supported devices: Smart devices with built-in WIFI AP (Access Point) mode
function, notebooks or PCs.
6. Wi-Fi standard 802.11 b / g / n, supports AP mode
2
2 (6-7) will flash. Blinking: The base station is
SETTINGS
SETUP ADVANCED
Language: English
WiFi Router setup
3
Search Router: ROUTER_A
Add Router
4
Security type: WAP2
******
Router Password:
Weather server setup
Wunderground
Station ID: WDw124
******
Station key:
Weatherclou d
Station ID: IPACIR23Wc
Station key: ******
URL: http://W AC.com
Station ID: IDCR21w1
******
Station key:
Mac address
00:0E:C6:00:07:10
Time server setup
nist.time.gov
Server URL:
Time Zone: 0:00
Location for sunrise / sunset
*Latitude: 0.0000 North
15
Enter 0 to 90, no negative number s
*Longitude: 0.0000 East
16
Enter 0 to 180, no negative number s
Hemisphere N
* Depends on the mode l
Firmware version: 1.00
Apply
2 Select language
4 Select 'Add Router' to add routers manually**
6 If the router is not listed, enter SSID manually
8 Enter the password of the router (leave the
10 Enter 'Station ID' and 'Station key' registered
12 Enter 'Station ID' and 'Station key'
14 Select the time zone of your location
16 Enter longitude
18 Select the hemisphere in which the sensor is
3
trying to establish a connection to the WIFI
router
1
2
5
6
7
8
9
10
11
12
13
14
17
18
19
field empty if no password has been assigned)
with Weathercloud*
located (for USA and EU countries "N", for
Australia "S".
13 / 32