Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Remove the protective film from the adhesive
strips.
•
Press the assembled status display with the
back side to the wall in the position where it
should subsequently be attached.
5.1.2 Screw mounting
For mounting the status display using screws, please
proceed as follows:
•
Choose a site for installation.
Make sure that no electricity or similar lines run
in the wall at this location!
•
Position the mounting plate (A) on the desired
site on the wall. Make sure that the arrow on the
mounting plate is pointing upwards.
Start-up
45
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
