Herunterladen Inhalt Inhalt Diese Seite drucken

Adhesive Strip Mounting - eQ-3 HomeMatic HM-Dis-EP-WM55 Montage- Und Bedienungsanleitung

Funk-statusanzeige mit taster für 55er rahmen
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Start-up
If you want to mount the status display with the sup-
plied clip-on frame, you can use
the supplied double-sided adhesive strips or
the supplied screws
to fix it to a wall.

5.1.1 Adhesive strip mounting

For mounting the assembled device to the wall using
adhesive strips, please proceed as follows:
Choose a site for installation.
Make sure that the mounting surface is smooth,
solid, non-disturbed, free of dust, grease and
solvents and not too cold to ensure long-time
adherence.
Fix the adhesive strips on the back side of the
mounting plate (A) in the provided area. You
should be able to read the letters on the back
side (according to figure).
44

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Homematic hm-dis-wm55142414142408132656

Inhaltsverzeichnis