If required, remove the filters. Unscrew
the microfilter for coarse dirt. Also remove
the flat filter. Remove coarse dirt. Wash
the filters under running water.
Assembly:
Insert the filter system; screw in the
cylindrical filter.
Spray arm
Limescale and dirt from the rinsing water
may block nozzles and the bearing
assemblies of the spray arm
Check the outlet nozzles on the spray
arm for blockages caused by food
remnants.
The spray arm is attached with a clip.
If required, pull off the spray arm.
Clean the spray arm under running water.
Insert the spray arm and lock into
position.
en
.
22
37