About The Analogue Tv Receiver - AEG CTV 4894 Bedienungsanleitung

Analogue TV Settings
System
05-CTV 4894_GB.indd 71 05-CTV 48 _GB.indd 71

About the Analogue TV Receiver

If you are in analogue TV mode you can make the adjustments described
above in the „Changing the Screen Settings" section.
You can also now access the menus „System" and „Preset".
Here you can start the automatic channel search, move and skip channels,
etc.
NOTE:
The analogue settings menu can only be selected in analogue TV mode.
Press the MODE button (Fig. 3/22) repeatedly to select the individual
menus and a (PICTURE, VOLUME, OPTION, SYSTEM, PRESET).
Use the ( / ) cursor buttons (Fig. 3/8) to select the option. Make the
adjustments with the cursor buttons ( / ).
Colour System (S-ROLOC)
Adapt the output of the device to the colour transmission system of your
playback device. The following options are available:
AUTO: Select this setting if your playback device is a multisystem
device.
PAL: A widespread system in Europe.
SECAM: A system used in France and Eastern Europe.
Sound Syst (S-SYS)
em
Here you can set the standard system according to your region.
BG: A widely used system in Western Europe.
DK: A widely used system in Eastern Europe.
I: The most widely used system in the United Kingdom, Ireland, Hong
Kong and South Africa.
L: The most widely used system in France.
Swap
In this menu you can swap two television channel places with one
another.
1. First set the channel which you would like to swap. Now call up the
analogue OSD menu and select the „Swap" option.
2. Use the cursor buttons ( / ) to select the channel place with which
the selected channel is to be swapped (e.g. 2
3. Then press the cursor button ( ) in order to select the channel to be
swapped.
4. For example 2 3 is shown in the display. In this example, the
channel is moved from position 3 to position 2 by pressing the cursor
button ( ).
English
71
).
20.03.2008 12:01:18 Uhr 20.03.2008 12:01:18 Uhr