Ryobi OPS-1820 Bedienungsanleitung Seite 14

GB
F D E
Prevent unintentional starting. Ensure the switch is in
■
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or
energizing power tools that have the switch on invites
accidents.
Remove any adjusting key or wrench before turning
■
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal
injury.
Do not overreach. Keep proper footing and balance at
■
all times. This enables better control of the power tool
in unexpected situations.
Dress properly. Do not wear loose clothing or
■
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
If devices are provided for the connection of dust
■
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power
■
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
Do not use the power tool if the switch does not turn it
■
on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect t he plug from the power source and/or
■
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and
■
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or
■
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and clean. Properly
■
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in
■
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations
Downloaded from www.Manualslib.com
I P NL S DK N
manuals search engine
FIN GR HU CZ RU RO PL SLO HR TR EST LT
English
different from those intended could result in a
hazardous situation.
BATTERY TOOL USE AND CARE
Recharge only with the charger specified by the
■
manufacturer. A charger that is suitable for tone type
of battery pack may create a risk of fire when used
with another battery pack.
Use power tools only with specifically designated
■
battery packs. Use of any other battery packs may
create a risk of injury and fire.
When battery pack is not in use, keep it away from
■
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
Under abusive conditions, liquid may be ejected from
■
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
SERVICE
Have your power tool serviced by a qualified repair
■
person using only identical replacement parts. This
will ensure that the safety of the power tool is
maintained.
READ ALL INSTRUCTIONS BEFORE OPERATING.
Do not allow children or untrained individuals to use
■
this unit.
Wear heavy long pants, non-slip safety footwear,
■
gloves, and a hard hat.
Never operate unit while bare foot or wearing open
■
shoes.
Do not wear loose clothing, or jewelry that might get
■
entangled in this unit.
Keep all bystanders, children, and pets at least 15 m
■
(50 feet) away. Remember that the operator or user is
responsible for accidents occurring to bystanders,
their property, as well as themselves.
Check for damaged parts. Before further use of the
■
appliance, any part that is damaged should be
carefully checked to determine that it will operate
properly and perform its intended function.
Check for alignment of moving parts, binding of
■
moving parts, breakage of parts, mounting, and any
other conditions that may affect its operation. A guard
or other part that is damaged should be properly
repaired or replaced by an authorized service center.
8
LV SK BG