Special Settings - Grundig CUC 7303 Serviceanleitung

Allgemeiner Teil / General Section
P+
14 VHF1
- ----- ---------- -------- ---- -------
P+
14 VHF1
- ----- ---------- -------- ---- -------
P14 403 MHz – 860 MHz
–
22
1 - 18

SPECIAL SETTINGS

Manually Assigning Channel Positions
You only need this setting if, for example a new cable channel is offered and you want to retain your
specific channel position sequence (e.g. BBC1 = 1, BBC2 = 2 etc.).
The example shows a new television channel in the frequeny band »UHF« to be set at channel
position »14«.
1 Call up the menu by pressing the »
The settings are made with the help of the menu.
Positions can be selected with
P+ 1
VHF1
0 DEC0
DEC 0
0
Select the current setting with
SPECIAL SETTINGS
2 Select channel position »14« with
3
Select display »VHF 1« with »
4
Select display »0« with »
0 DEC0
(The setting »0« is for PAL, B G, the setting »2« is for PAL DK/K').
5
Select display »
– The display »Channel search« appears.
6 Start channel search by pressing
– The channel search stops at each television channel received.
– Repeat the search until the desired television channel appears on the screen.
Note:
Picture and sound can be fine-tuned by pressing
+
i
7
End channel search with »
8 Save the setting for this channel position with
– Set further television channels by repeating the procedure from step 2.
9
End setting with the »
_________________________________________________________________
« and then the »OK « buttons.
i
F E
»F « or »E «:
– Channel position from 1 to 69;
– Frequency band
VHF 1 (45 MHz – 137 MHz, C02 – C04, S01 – S05),
VHF 3 (137 MHz – 403 MHz, C05 – C12, S06 – S33),
UHF (403 MHz – 860 MHz, S34 – S41, C21 – C69),
---- channel position limitation;
– Decoder, DEC 1 – Decoder on, DEC 0 – Decoder off;
– Television norm (0 = PAL, BG 1 = PAL DK/K');
– Search.
. ,
». « or », «.
_________________________________________________________________
». . « or », , «.
E E . ,
« and with ». « or »,
E E . ,
« and with ». « or », « select the television norm.
E E .
« with » « and press ». « once.
»F F « or »E E « and holding down until the search starts.
F
»F « or »E
i «.
»OK «.
i « button.
CUC 7303
« select the setting »UHF«.
E
« briefly.
GRUNDIG Service
21