CUC 7303
P+
14 UHF
- ----- ---------- -------- ---- -------
P+
6
VHF1
- ----- ---------- -------- ---- -------
0-9
TXT
P+
6
----
- ----- ---------- -------- ---- -------
0-9
TXT
20
GRUNDIG Service
CONNECTION POSSIBILITIES
Decoder
Television programmes received from some cable or satellite stations are encoded. The picture and
with some stations the sound is unrecognisable. You can decode these television programmes with a
decoder.
Connection
1
Connect the »
with a EURO-AV cable.
Settings for operation with a decoder
1
Select channel position of the encoded television channel.
2
0
DEC0
Call up the menu by pressing the »
– The »Programmeinblendung« (Channel display) menu appears.
3
Select display » DEC 0 « with
4
Save setting with
SPECIAL SETTINGS
Limiting channel position selection
The ATS search stores all the television channels it finds and automatically "blocks" onto the first non-
assigned channel position.
This means that only the found television channels can be selected with the step-by-step channel
position selection using
0
DEC1
This limit can also be manually entered. The example shows "blocking" after channel position 6.
1
Call up the menu by pressing the »
OK
i
– The »Channel display« menu appears.
2
Select channel position 6 with the
3
Select display »VHF 1« or »VHF 2« with
4
Save setting with
– Now only the first 5 channel positions (and channel position »AV«) can be selected with
,
or
»,
«.
0
DEC1
– All the channel positions set including the "blocked" ones can stil be selected with
– If everything after channel position 11 is blocked, all channel positions can be seleced with
»0 ... 9
«.
OK
i
___________________________________________________
EURO-AV
« socket of the television set and the appropriate socket of the decoder
EURO-AV
i
« and then the
»OK
E
.
»E
« and with
».
« or
»OK
« and end with »
«.
i
__________________________________________________________
.
,
».
« or
»,
«.
« and then the
»OK
i
».
.
« or
»,
,
« buttons.
E
»E
« and with
»OK
« and end with »
i
«.
Allgemeiner Teil / General Section
« buttons.
,
»,
« select the setting » DEC1«.
« buttons.
.
,
».
« or
»,
« select the setting »----«.
».
.
»0 ... 9
«.
19
«
1 - 17