Vaporesso LUXE II Anleitung Seite 6

*STC: SMART TEMPERATURE CONTROL MODE
When the temperature heating wire (SS/Ti/Ni) is detected, the
device will provide an option to enter the STC (Smart TC) mode
automatically.
*DIY: DIY MODE
You can choose traditional VW (H, N, S), VV, VT, CCW, BP (bypass)
and SP (super player) modes in this section. When the coil
resistance is extremely low, the device will provide an option
to enter the SP (Super Player) mode automatically.
PROTECTIONS
No.
1 USB Input Protection
2 Low Battery Protection The battery level drops too low.
3 No Load Protection
4 Low Resistance
Protection
5 Overtime Protection
6 Overheat Protection
7 Short Circuit Protection The device detects a short
CAUTIONS
1. Please turn off the device when it is not in use.
2. Do not leave the charging device unattended.
3. Do not drop, throw or abuse your device, which may cause
damage.
4. Please use a standard USB output charger with proper
charging current and voltage range.
5. Keep away from the water or any flammable gas, liquid.
6. Do not expose the device to direct sunlight, dust, moisture
or mechanical shock.
4 English
Protections Situations
The USB input voltage is higher
than the rated voltage.
The device detects no POD on
the battery.
The device detects an ultra-low
resistance.
Constantly vape for more than
10 seconds.
The device detects an
overheated PCBA.
circuit.