Vaporesso LUXE II Anleitung Seite 5

2. Fill E-liquid
Push the top cap according to the arrow direction and fill
e-liquid through the hole, then lock the top cap in place after
filling is finished.
3. Adjust the Airflow
Rotate the air-inlet dial to adjust the airflow volume.
4. Start the Device
- Before use: install two 18650 batteries to the device, the
battery is not included in the kit.
- Power on/off: press the power button 5 times in 2s.
5. About Charging
After the Micro USB cable is connected to the battery,
the charging indicator and remaining charging time will be
displayed on the screen.
6. Lock/Unlock the Buttons
Press the power button 3 times continuously to lock or unlock
the "+" button, "-" button and mode button. The power button
still works.
7. Choose a Mode
Press the mode button 3 times continuously or long press the
mode button to start mode setting.
*PUL: PULSE MODE (DEFAULT)
After the atomizer is installed, the device will enter the PULSE
MODE automatically.
PULSE MODE: It's a mode to improve vaping experience
through constant voltage output, delivering optimal flavor
production, nicotine satisfaction, and perfect temperature
cloud continuously.
*ECO: POWER ECO MODE
AWhen the battery level is below 40% and unable to support
the preset power, the device will automatically provide
an option to enter the POWER ECO mode for increasing
endurance.
English
3