Responsibilities Of The User; Designated Use; Technical Data - Abicor Binzel CAT2 Betriebsanleitung

2 Product Description
Designation
Relevant EC Directives
Harmonized standard applied
Tab. 1 EU Declaration of Conformity

1.2 Responsibilities of the User

2 Product Description

2.1 Designated Use

2.2 Use contrary to the designated use

2.3 Technical Data

Transport and storage
Relative humidity
Tab. 2 Temperature
CAT2 without mount
CAT2 with mount
Tab. 3 Weight
EN - 4
CAT2 robot mount
Machinery Directive 2006/42/EC
DIN EN ISO 12 100
Within the EEA (European Economic Area) the current version of the national
implementation of the Framework Directive (89/391/EEC) and the related
individual directives and, of these, especially Directive (89/655/EEC)
concerning the minimum safety and health requirements for the use of work
equipment by workers at work must be adhered to. In Germany, the Job
Protection Law and the Company Safety Ordinance must be heeded. In
addition, the operator must ensure that the welding torch and welding unit
comply with the EC EMC Directive (04/108/EC) and that the signal utilization
of the integrated welding current monitoring against stray currents is installed
properly.
The CAT2 must be used in the robot welding area. Designated use also
includes the observance of the prescribed operating, maintenance and
servicing instructions.
Any use other than that described under "Designated Use" is considered
contrary to the designated use. Unauthorized conversions are not allowed. The
warranty does not cover wear parts and damage due to overloading or
improper use.
- 10 °C to + 55 °C
up to 70 % at 20 °C
0,65 kg
0,85 kg
CAT2