Manual Adjustment; Electronic Adjustment - AEG FAVORIT 54000 VI Benutzerinformation

30

Manual adjustment

Electronic adjustment

1. Press the on/off button to activate the
appliance.
2. Make sure that the appliance is in set-
ting mode. Refer to 'SETTING AND
STARTING A PROGRAMME'.
3. Press and hold function buttons (B)
and (C) at the same time until the indi-
cators of function buttons (A), (B) and
(C) flash.
4. Press function button (A).
• The indicators of function buttons
(B) and (C) go off.
• The indicator of function button (A)
continues to flash.
FILLING THE SALT CONTAINER
Turn the water hardness dial to the posi-
tion 1 or 2.
• Intermittent acoustic signals oper-
ate and the end indicator flashes
showing the setting of the water
softener.
– The number of flashes of the end
indicator and the number of the
acoustic signals show the level of
the water softener.
Example: 5 acoustic signals and 5
flashes + pause + 5 acoustic sig-
nals and 5 flashes = level 5.
5. Press function button (A) again and
again to change the setting. Each time
you press function button (A) you go
to the next level.
6. Deactivate the appliance to confirm.
CAUTION!
Only use dishwasher salt. Other
products can cause damage to
the appliance.
Water and salt can come out from
the salt container when you fill it.
Risk of corrosion. To prevent it, af-
ter you fill the salt container, start
a programme.
1. Turn the cap counterclockwise and
open the salt container.
2. Put 1 litre of water in the salt contain-
er (only for the first time).
3. Fill the salt container with dishwasher
salt.
4. Remove the salt around the opening
of the salt container.
5. Turn the cap clockwise to close the
salt container.