Place The Boundary Flags - Petsafe PRF-3004XW-20 Gebrauchsanweisung

• Chain Link Fence (7A): Weave Boundary
Wire through the links or use plastic quick ties.
• Wooden Split Rail or Privacy Fence (7A):
Use staples to attach Boundary Wire. Avoid
puncturing the insulation of the Boundary
Wire.
• Double Loop with an Existing Fence: Run
Boundary Wire on top of the fence and return it
on the bottom of the fence to get the 1.5 m
(5 ft) separation needed.
• Gate (Single Loop) (7B): Bury the Boundary
Wire in the ground across the gate opening.
Note: The signal is still active across the gate. Your
pet cannot pass through an open gate.
• Gate (Double Loop) (7B): Bury both
Boundary Wires across the gate opening while
keeping them 1.5 m (5 ft) apart.
To Cross Hard Surfaces (driveways, sidewalks, etc.)
Follow all safety instructions for your
power tools. Be sure to always wear your safety
goggles.
• Concrete Driveway or Sidewalk (7C): Place
the Boundary Wire in a convenient expansion
joint or create a groove using a circular saw
and masonry blade. Place the Boundary Wire
in the groove and cover with an appropriate
waterproofing compound. For best results, brush
away dirt or other debris before patching.
• Gravel or Dirt Driveway (7D): Place the
Boundary Wire in a PVC pipe or hose pipe to
protect the Boundary Wire before burying.
__________________________________________________

Place the Boundary Flags

Step
8
The Boundary Flags are visual reminders for your pet of where the Warning Zone is located.
1. Place the Test Light contacts on the contact
points and hold the Receiver Collar at your
pet's neck height.
2. Walk towards the Warning Zone until the
Receiver Collar beeps (8A).
3. Place a Boundary Flag in the ground (8B).
4. Walk back into the Pet Area until the
beeping stops.
5. Repeat this process around the Warning
Zone until it is marked with Boundary Flags
every 3 m (10 ft).
Note: If you cannot hear the beep, see the Test Light
Instructions in Step 6.
14
7A
WEAVE WIRE INTO FENCE
STAPLE WIRE TO FENCE
STAPLE WIRE
TO FENCE
7C
8A
petsafe.com
7B
SINGLE LOOP
1.5 m
(5 ft)
DOUBLE LOOP
7D
8B
Boundary
Wire
1.5 m
(5 ft)