Using Close Call Mode - Albrecht AE75H Bedienungsanleitung

VHF High
UHF
You can set the scanner so it alerts you when the Close Call feature
detects a frequency. Program alert tones through your PC (see page
73).
Notes:
Close Call RF capture cannot detect frequencies outside the
scanner's normal operating range.
Close Call mode works better with some types of transmissions
than others. It might not correctly display frequency information for
transmitters using a highly directive antenna (such as an amateur
radio beam antenna), if there are many transmitters operating at
the same time in the same area, or if the transmitter is a broadcast
television station.

Using Close Call Mode

Close Call mode has three operation modes:
Close Call DND. Close Call Do Not Disturb only checks for close
calls if it is not stopped on a transmission. The Icon
Close Call Priority. The scanner checks for close calls regardless
of whether it is stopped on a transmission. The
Close Call Off. The scanner does not check for close calls. No icon
displays.
Pressing Func +
order: Close Call Off/Close Call DND/ Close Call Priority.
To turn on Close Call mode, press Func +
Select, or Program mode.
Notes:
Set the squelch tight (where only strong signals are received)
while using the Close Call feature.
To continue scanning normally while the Close Call feature is
working, simply press Scan.
68
137.00000
400.00000
cycles through the Close Call functions in this
174.00000
512.00000
English
3
4
icon displays.
once except in Band
displays.