Siemens SIPROTEC 4/5 Handbuch Seite 102

Maintenance and Repair
6.2 Repair
!
WARNING
Warning against using a fuse of the wrong size
Disregarding this may result in death or severe injury.
Use only a fuse of the type T2A/250V.
²
Reinstall the device according to chapter
²
Board Assembly.
If you have disconnected the conductors from the junction block, reconnect the conductors to the screw
²
terminals. Make sure that the wiring is correct.
Commission the device.
²
40
5.2.2 Installing and Removing the Pluggable Printed Circuit
SIPROTEC 4/5, Injection unit 7XT71, Manual
C53000-B1174-C128-8, Edition 05.2020