LUCCI Air FUTURA MOOD Installationsanleitung Seite 7

Futura Mood Installation Instructions
Lift the fan assembly onto the mounting bracket. Ensure the registration slot (A) of the hanger ball is
positioned on the stopper (B) of the mounting bracket (C) to prevent the fan from rotating when in
operation. (Fig.4)
1. Insert the blades through the side slot of the motor and align with the 3 holes. If the holes do not align, the blade
is upside down. The blade should fit securely and the screws should slot into the blade screw holes. Insert the
screw driver with the screw through the key hole of the lamp bracket. Secure the blades with 3 blade screws.
Ensure all screws are tightened evenly to reduce the chance of warping or unbalancing. Repeat this process
for all blades. Fig. 5
2. Attach the LED light kit to the lamp base and connect wires to the LED light kit via the quick connectors. Insert
the housing assembly screws into the larger ends of the key hole slots and turn the LED light kit body clockwise
until the housing assembly screws are firmly situated in the narrow ends of the keyhole slots. Fig. 6
7 | P a g e
HANGING THE FAN
INSTALLING THE FAN
Fig. 4
Fig. 5