Danger Caused By An Uncontrolled Escape Of Hot Fluids; Risk Of Burns Due To Hot Components And Surfaces; Availability Of The Operating Instructions; Danger To Life Due To Electric Current - oventrop Unibox T-RTL vario Betriebsanleitung

Unibox T-RTL vario
2.5.3 Danger caused by an
uncontrolled escape of hot fluids
f Only carry out work when the product is
depressurised.
f Allow the product to cool down before
working on it.
f Check that the product is not leaking after
work is complete.
f If necessary, cover the vent holes with a
cloth.
f Replace any defective components imme-
diately.
f Wear safety goggles.
2.5.4 Risk of burns due to hot
components and surfaces
f Allow the product to cool down before
working on it.
f Wear suitable protective clothing to avoid
unprotected contact with hot system com-
ponents and fittings.
2.5.5 Availability of the operating
instructions
Any person working on the product has to
read and apply these operating instructions
and all other valid documents (e.g. accessory
manuals).
The operating instructions must be available at
the installation location of the product.
f Hand these operating instructions and all
other relevant documents (e.g. accessory
manuals) over to the user.
2.5.6 Danger to life due to electric
current
Any work on the power supply must only be
carried out by a qualified electrician.
f Check that no voltage is present.
f Only install the product in dry indoor areas.
102273480-V03.06.2020

Technical description

3. Technical description

3.1 Construction

1 2 3
Illust. 2: Construction "Unibox T-RTL vario"
(1) Fixing bracket
(2) Wall box unit
(3)
Valve with presettable insert and inte-
grated return temperature limiter
(4)
Venting and flushing valve
(5)
Thermostatic valve connection for
remote control (control piston) or
actuator
(6) Valve connection G ¾ male thread
(cone "Euro" according to DIN EN
16313)
4
5
6
27