BOMANN kw 1413 cb Bedienungsanleitung Seite 45

UNIT
By pressing the UNIT button in the weighing mode you can select between grams
(g) and ounces (oz).
Countdown Timer Function
• To set the timer, press the MODE button once briefl y. The symbol „00:00"
appears in the display together with the letters „TMR". Then keep the MODE
button pressed down until the seconds begin to fl ash.
• When the UNIT button is pressed once the display jumps forward by one
second. Keeping the buttons pressed down starts the rapid advance function
until the desired time is reached. If the MODE button is pressed again the
minutes fl ash in the display. Set the minutes with the UNIT button. Then press
the MODE button to start the countdown.
• Once „00:00" has been reached an acoustic signal is heard, which switches
off automatically after approximately 30 seconds. The signal can be interrupted
with the MODE or the UNIT button. The display changes back to the time as
soon as the MODE button is pressed, or after approx. 20 sec.
• Press the UNIT button to briefl y interrupt and then restart the countdown.
• If the MODE button is pressed during the countdown, the display changes to
the time and the timer continues to run in the background. In order to reset the
countdown back to „00:00", please keep the UNIT button pressed down.
• If the MODE button is pressed fi rst and then the UNIT button, the last timer
setting entered is shown.
The timer can be set in steps of one minute up to 99 minutes.
Weighing Function
1. Press the ON/TARE button to switch the device on. The display shows „0 g"
or „0,0 oz".
2. Place the item to be weighed on the glass surface. The weight is now shown.
If further ingredients are placed on the weighing surface the weights are added
together.
3. If you would like to use an appropriate vessel, place it on the glass surface and
then press the ON/TARE button; the display is set to „0". If the vessel is fi lled,
only the weight of the ingredient is shown.
Weigh-in Function (TARA)
If you would like to weigh further ingredients for example, use the weigh-in function.
1. Press the ON/TARE button again.
2. Now put a further ingredient on the weighing surface. The actual weight of
the second ingredient is now shown in the display. Repeat this procedure if
necessary.
05-KW 1413 CB 45
GB
45
14.03.2006, 10:27:19 Uhr