Setting Up; A) Charge The Battery; B) Microsd; Getting Started - VOLTCRAFT WBP-80 Bedienungsanleitung

8. Setting up

a) Charge the battery

• Lift the cover flap marked
micro USB port (7).
• Using the included cable, connect one end
to the micro USB port and the other end to a
suitable USB-A power source.
The LED charging indicator (6) and the display (1)
•
will show the battery status. Charging (red)/fully
charged (green)

b) MicroSD

• Lift the cover flap marked
microSD card slot (9).
• Insert the card in the direction shown on the
cover. It should "click" into place.
• Replace the cover.
38
to access the

9. Getting started

a) Power on/off

Press and hold the power button (10) to turn the
power on or off.
b) Temperature calibration
The inherent temperature drift of the thermal sensor
to access the
can affect the accuracy of measurements.
To calibrate the sensor, turn the power on (10) then
press the left button ◄ (3). The display will show
"calibrating" to indicate that the temperature has
been calibrated.
You may need to restart the device for
the SD card to register. When using an
SD card the first time please format it. For
further details see sections 11. e) "Settings",
"Format SD" and 16. "Technical data".