Samsung POWERbot SR1 Serie Kurzanleitung Seite 7

When the product is purchased, the battery is not charged, so charging must initially be done manually.
How to turn on the
emergency switch
Hold the robot vacuum cleaner and turn
on the emergency switch without pressing
any buttons.
0.5 m
Ensure the power
cord is arranged
neatly next to the
wall.
VR7000_Q_guide_13ge_00780C-02.indb 7
3
Charging
<SR1✴M701✴✴✴ Series>
<SR1✴M702✴✴✴ / SR1✴M703✴✴✴ /
SR20M70✴✴✴✴ Series>
Ú Install with the grain of wood floors.
0.5 m
1 m
Check the charging status.
For SR1✴M701✴✴✴ Series,
The battery indicator blinks at 1 sec.
intervals during charging and the
indicator will remain in ON status
when fully charged.
For SR1✴M702✴✴✴ /
SR1✴M703✴✴✴ / SR2✴M70✴✴✴✴
Series, "
according to charging progress and
"FULL" will turn on when charging is
complete.
Please install the docking station in a place
where the floor is level and wall is straight.
Make sure the
charge pins on the
robot vacuum cleaner
and the docking station
are aligned.
English-7
" will turn on
Install the docking
station where the robot
vacuum cleaner can
easily find.
2017-12-04 오전 10:17:57