Using Your Tv Display With A Universal Or Learning Remote Control - Dell W1900 Benutzerhandbuch

Using Your TV Display With a Universal or Learning
Remote Control
Preprogrammed universal remote controls can be programmed to control the following
functions on your Dell TV display:
•
•
•
•
•
•
•
You can program universal remote controls to work with your Dell TV display in the following ways:
•
•
•
22
Your Remote Control
Downloaded from www.Manualslib.com
20 POP PBP
Audio
21
22 Vol +
23 Vol -
Menu
24
25 Disp
Input
26
Power
Channel Up (+)
Channel Down (-)
Volume Up (+)
Volume Down (-)
Mute
Input Select
NOTE: Future preprogrammed universal remote controls may be able to control
more functions.
If the remote control manual lists codes by manufacturer, use the Philips codes.
If the remote control has a search function, this function may be used to find the
correct code.
If the remote control has a learning function, you can program specific buttons on it from
the Dell remote control, in addition to those buttons listed above.
NOTE:
For additional information, see the documentation that came with your universal or learning
remote control.
manuals search engine
Enters and exits POP or PBP mode
Cycles through the preset Audio options
Increases the volume
In the OSD, use the volume button to navigate through
the menus.
Decreases the volume
In the OSD, use the volume button to navigate through
the menus.
Enters and exits the OSD main menu
Displays information about your TV (for example, in TV
Mode displays the channel you are watching)
Enters and exits the Input Select menu