Care And Cleaning; General Information; Cleaning The Hob; Troubleshooting - Electrolux EHI8742FOK Benutzerinformation

6. CARE AND CLEANING

6.1 General information

• Clean the hob after each use.
• Always use cookware with clean
• Scratches or dark stains on the surface
• Use a special cleaner applicable for the
• Use a special scraper for the glass.

6.2 Cleaning the hob

• Remove immediately: melted plastic,

7. TROUBLESHOOTING

7.1 What to do if...
Problem
You cannot activate or op-
erate the hob.
Downloaded from www.Manualslib.com
WARNING!
Refer to Safety chapters.
bottom.
have no effect on how the hob
operates.
surface of the hob.
plastic foil, and food with sugar. If not,
WARNING!
Refer to Safety chapters.
manuals search engine
the dirt can cause damage to the hob.
Put the special scraper on the glass
surface at an acute angle and move
the blade on the surface.
• Remove when the hob is
sufficiently cool: limescale rings,
water rings, fat stains, shiny metallic
discoloration. Clean the hob with a
moist cloth and some detergent. After
cleaning, rub the hob dry with a soft
cloth.
Possible cause
The hob is not connected
to an electrical supply or it
is connected incorrectly.
The fuse is released.
You touched 2 or more
sensor fields at the same
time.
STOP+GO function oper-
ates.
ENGLISH
Remedy
Check if the hob is correctly
connected to the electrical
supply. Refer to the con-
nection diagram.
Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact a
qualified electrician.
Activate the hob again and
set the heat setting in less
than 10 seconds.
Touch only one sensor field.
Refer to "Daily use" chapter.
13