Aftercare; Cleaning & Storage - Philips Lumea BRI858 Bedienungsanleitung

34
English
- Excessive pain: this can occur during or after
treatment if you have used the device on
skin that is not hair-free, if you use the
device at a light intensity that is too high for
your skin tone, if you flash the same area
more than once and if you use the device
on open wounds, inflammations, infections,
tattoos, burns, etc.

Aftercare

Cleaning & storage
After use, you can safely apply lotions, creams,
deodorant, moisturizer or cosmetics to the treated
areas. If you experience skin irritation or skin
redness after treatment, wait until it disappears
before applying any product to your skin. If you
experience skin irritation after applying a product
to your skin, wash it off with water.
Note: when following all instructions you may still
get skin reactions. In this case stop using the
device and contact the consumer care center in
your country.
1 After use, switch off the device, unplug it and let
it cool down.
2 Moisten a soft cloth with a few drops of water
and use it to clean the following parts:
- the light exit window including the reflectors
on the side
- the skin tone sensor
3 Store the device in a dust free and dry place at
a temperature between -25 °C and 75 °C, with a
storage humidity up to 75%.