Function Button - Korg StageVintage SV-1 Anleitung

12 – Controls and connections | Front panel
TRANSPOSE button
8
Use this button to transpose your keyboard. See "Transposing" on page 27.
LOCAL OFF button
9
Here you can turn the Local Off function on or off. When you turn the LED of
this button on, the keyboard is disconnected from the internal sounds. By play-
ing the keyboard, you cannot hear any sound from the internal tone generator.
However, notes continue to be sent to the MIDI OUT port (or the USB port),
and can be received by a computer. The computer sends them back again to the
SV-1's MIDI IN port (or the USB port), and then to the internal tone generator.
This routing allows you to record and play at the same time, without duplicate
notes.
TOUCH button
0
Use this button to adjust the sensitivity of your keyboard. See "Changing the
touch sensitivity" on page 30.

FUNCTION button

A
Use this button to make MIDI and tuning settings, to adjust the RX Noise com-
ponent volume, or to restore the instrument to the default configuration. When
pressing it, a LED around the TREBLE and BASS knobs, and the FUNCTION #1
button, may start blinking.
FUNCTION, then ...
EQ - TREBLE
EQ - BASS
FAVORITES 1 – 8
NOTES C6 – D#7
Does this
Adjust fine tuning. See "Fine tuning the instrument" on page 28.
Adjust the volume of the RX Noise component of the sound. See
"Adjusting the RX Noise level" on page 32.
Selects the corresponding tuning curve (out of 8). See "Choosing a tun-
ing curve" on page 29.
Select the corresponding MIDI channel (out of 16). See "Choosing a
MIDI channel" on page 32.
8 9 0 A