Turning Off the Power
1
Press the ?/1 key on the main unit or the Remote Commander.
The message appears. Press it again according to the message.
2
Unplug the AC power cord from the wall outlet.
After step 1, the fan continues to run for a while to reduce internal heat, however, you may
also unplug the AC power cord before the fan stops.
To clear the confirmation message
The message disappears if you press any key other than the
Remote Commander, or if you do not press any key for a while.
To turn off without displaying confirmation message
?/1
Hold the
key on the main unit pressed for a few seconds.
12
GB
Projecting an Image
?/1
key on the main unit or the