Installing the computer module
Install a compatible computer module of the digital
manual of the computer module.
Installing the user module
The remote console is connected to the
computer connected to the computer module can be operated from this console.
Establishing a connection to a local management network
NOTE:
If desired, connect this network interface to a local network. This enables
you to access the
Config Panel
log messages to this network.
Network Management:
Insert a category 5 twisted pair cable (or better), which is availa-
ble as accessory. Connect the other end of the cable to the local network.
Connecting keyboard and mouse of consoles
NOTE:
Both the keyboard and the mouse of the console can either be PS/2 or USB
devices.
Connect the mouse and/or the keyboard of the console to this interface.
Keyb./Mouse:
Generic:
In the default settings, you can use this interface to connect another USB
input device, a supported display or tablet, or a USB mass storage device.
DL-DVI-Vision-IP-Fiber-CON
web application from this network and to send sys-
Installation
Vision
series as described in the
user module. The
G&D DL-DVI-Vision-IP-Fiber · 8