Freeze Mode - G&D DL-DVI-Vision-IP-Fiber-Serie Installation Und Bedienung

Configuration
In such cases, reduce the colour depth of the image data to 18 bits. This way the
data volume to be transmitted can be reduced.
NOTE: Depending on the image contents, reducing the colour depth may result in
slight colour grades.
How to change the colour depth of the image data to be transmitted:
1. Press
Ctrl+Num
2. Select the row
3. Under
Color depth
24 Bit:  transmits the image data with a maximum colour depth
of 24 bits (default)
 reduces the colour depth of image data to 18 bits
18 Bit:
4. Press F2 to save your settings.
1. In the menu, click on
2. Click on the computer module (CPU) you want to configure and then click 
on Configuration
3. Click on the tab
4. When using a multi-channel device, click on the desired video channel and
then click on
5. Select one of the options given under
24 Bit:  transmits the image data with a maximum colour depth
of 24 bits (default)
18 Bit:  reduces the colour depth of image data to 18 bits
6. Click on Save

Freeze mode

If the cable connection between the computer module and the user module is inter-
rupted during operation, the KVM extender no longer displays an image at the remote
console.
Enable the Freeze mode if you want the last image that has been displayed at the user
module to be available until the connection is re-established.
To highlight an interrupted connection, the last available image can be displayed
with either a coloured frame and/or a
connection has been interrupted.
43 · G&D DL-DVI-Vision-IP-Fiber
(default) to open the on-screen display.
and press
Target setup
press to select on of the following options:
F8
KVM extender
.
Video channels .
Configuration .
.
.
Enter
.
Colour depth :
Frozen popup and the time passed since the