Iv. Starting The Navigation Software - Medion Gopal P 4245 Bedienungsanleitung

IV. Starting the Navigation Software

Note
Your memory card will always have to be inserted into
the device during the use of the navigation system, if
the card contains (additional) mapping material.
It will be necessary to carry out a reset to restart the
navigation system if the memory card has been re-
moved while the system was being used (see page 34).
According to the navigation system the reset is carried
out automatically.
1. Switch on your navigation system.
2. The Navigation software will start automatically or after
tapping on the navigation control button on the main
screen, according to the version.
3. Tap on Navigation on the screen for entering the destina-
tion. Enter the destination address. Confirm your entry by
tapping the
short time, if the satellite reception is adequate you will re-
ceive augmented language statements.
Further information regarding the navigation software can be
found on the comprehensive manual on your navigation DVD.
This is a PDF-file you can read and print with any Acrobat
Reader.
symbol to start the navigation. After a
Navigation 43