Operating And Changing The Vaping Mode - SC iStick Power Bedienungsanleitung

39
SC iStick Power – Operating and changing the vaping mode
Changing between the vaping modes
Long press the mode button to switch among VW, Bypass, Smart, TC-Ni, TC-Ti, TC-SS, TCR-M1, TCR-M2, TCR-M3
modes�
Explanation of the VW mode
When set in VW mode, the device can support a coil whose resistance is within the range of 0�1 ohm to 3�5 ohm�
Adjust wattage: In VW mode, the output wattage can be adjusted from 1W to 80W by pressing "up" button or
"down" button� Use the "up" button to increase and the "down" button to decrease� By long pressing the "up"
button or "down" button can rapidly increase or decrease the wattage level�
Explanation of the Bypass mode
Direct output voltage system is applied in Bypass mode� The higher the battery level is, the higher the output
voltage is� When set in this mode, the device can support a coil whose resistance is within the range of
0�1 ohm to 3�5 ohm�
Downloaded from www.Manualslib.com manuals search engine