SC iStick TC200W Bedienungsanleitung Seite 49

SC iStick TC200W – Operating & Changing the Vaping Mode
Note
1� This function should only be used at room temperature, to ensure that the correct "base resistance" is
locked�
2� When you remove the coil and then put it back while in resistance lock mode, the device can maintain the
same "base resistance" although the coil resistance may increase due to the rise of temperature� When you
remove the coil and then put a coil back while in resistance unlock mode, the screen may display "New coil
up same down"� If it is the same coil, press the left (-) button and if it is a new coil, press the right (+) button�
When changing coils, be sure to unlock the resistance so the base resistance matches the new coil�
3� If you accidentally use a conventional coil or coils with a resistance greater than 1�5 ohms in TC-Ni, Ti-TC,
TC-SS or TCR (M1, M2, M3) modes, the device will automatically switch to VW Mode�
Downloaded from www.Manualslib.com manuals search engine
47