Nuova Simonelli MicroBar Gebrauchsanweisungen Seite 61

UK
8. SPECIAL MACHINE
SCALING FUNCTIONS
8.1
This function allows you to reset the total amount of
water used.
Proceed as follows:
• Release voltage by turning the main switch off
(OFF).
• Reinstate voltage by turning the main switch on
(ON) and pressing down on the key:
until the display reads
8.2
This function makes it possible to reset the total
number of washing cycles.
Proceed as follows:
• Release voltage by turning the main switch off
(OFF).
• Reinstate voltage by turning the main switch on
(ON) and pressing down on the key:
until the display reads
8.3
This function makes it possible to remove incor-
rect functioning data and to reinstate the Standard
Programming settings (see PRESET SETTINGS
chart).
Proceed as follows:
• Release voltage by turning the main switch off
(OFF).
• Reinstate voltage by turning the main switch on
(ON) and simultaneously pressing down on the keys
Downloaded from www.Manualslib.com
RESETTING THE
CLEANING FILTER
LITRE COUNTER
7
RESETTING WASHING
CYCLES
5
RESETTING MACHINE
PARAMETRES
manuals search engine
ENTER
1
and RESET ;
3
until the display reads:
8.4 HANDLING MANUAL
COFFEE DELIVERY
GROUP
This function makes it possible to activate the motor
manually forming the automation of the manual cof-
fee delivery group. Proceed as follows:
• Release voltage by turning the main switch off
(OFF).
• Reinstate voltage by turning the main switch on
(ON) and simultaneously pressing down
on the arrow keys 
until the display reads:
IMPORTANT:
When the machine is switched
on, since the arrow key  is used
to access this site, the piston will
automatically start to move down-
wards.
• Press the arrow key 
DOWNWARDS.
• Press the arrow key 
UPWARDS.
• Release and reinstate voltage using the main
switch to end the procedure.
and  ;
4
2
to move the piston
4
to move the piston
2
59