Menu Options; Menu Selections; Recall Of Stored Data; Transmitting Stored Data - Tintometer Lovibond MD100 Bedienungsanleitung

Menu options

GB
Mode
On
Off
!
Store
1
3
Time
Store
diS
1
Time
Mode
Zero
Test
Mode
!
Store
Prt
1
Time
PrtG
On
Off
38
Downloaded from www.Manualslib.com

Menu selections

Press the [MODE] key and hold.
Switch the unit on using the [ON/OFF] key.
Allow the 3 decimal points to be displayed before releasing the
[MODE] key.
The [!] key allows for selection of the following menu points:
diS recall stored data
1
Date
Prt printing stored data
2 1
4
setting the date and time
Cal 2 3
user calibration
4
The selected menu is indicated by an arrow in the display.
Date
diS – Recall of stored data
1
Cal
After confirming the selection with the [MODE] key the photometer
shows the last 16 data sets in the following format (automatically
proceeds every 3 seconds until result is displayed):
Number n xx (xx: 16...1)
Year YYYY (e.g. 2014)
Date mm.dd (monthmonth:dayday)
Time hh:mm (hourhour:minuteminute)
Test Method
Result x,xx
The [ZERO/TEST] key repeats the current data set.
The [MODE] key scrolls through all stored data sets.
Quit the menu by pressing [!] key.
Date
Prt – Transmitting stored data (to Printer or PC)
1
Cal
Note: To print data, or to transmit to a PC, the optional IRiM (Infrared
Interface Module) is required.
The IRiM Module and the connected printer/PC must be ready. Press
the [MODE] key to start the transmitting, the instrument displays
"PrtG" (Printing) for approx. 1 second followed by the number of
the first data set and its transmission. All data sets will be transmit-
ted one after the other. After finishing the instrument switches to
test mode.
The print job can be cancelled by pressing the [On/Off] key. The
instrument switches off.
manuals search engine
MD100_6 10/2014