TORMATIC B-600 Serie Handbuch Seite 52

Testing of the garage door operator
Check list for the garage door operator
Confirm features at start-up with a check mark.
No. Equipment
1.0 Garage door
1.1 Manual operation of the door
1.2 Fastenings/connections
1.3 Pivots/joints
1.4 Track rollers/track roller holders
1.5 Seals/sliding contact strips
1.6 Door frame/door guide
1.7 Door leaf
2.0 Weight
2.1 Springs
2.1.1 Spring strips
2.1.2 Spring break device
2.1.3 Safety elements (spring connector,...)
2.2 Wire cables
2.2.1 Mounting
2.2.2 Cable drum
2.3 Fall protection
2.4 Concentricity of T-shaft
3.0 Operator/controls
3.1 Operator/sliding rail/bracket
3.2 Electrical cables/connections
3.3 Emergency release
3.4 Control devices, push-button/hand transmitter
3.5 Limit stop
4.0 Safeguarding of crush and shearing zones
4.1 Force limit
4.2 Protection against lifting of persons
4.3 Site conditions
5.0 Other devices
5.1 Latching/lock
5.2 Wicket
5.2.1 Wicket door contact
5.2.2 Door closer
5.3 Traffic light control
5.4 Photoelectric sensors
5.5 Closing edge safety device
6.0 Documentation of the operator/owner
6.1 Data plate/CE marking
6.2 Door system's declaration of conformity
6.3 Installation, Operation and Maintenance Instructions
52
Downloaded from www.Manualslib.com
counterbalance/safe opening
manuals search engine
present Features to be tested
Smooth running
State/Seat
State/Lubrication
State/Lubrication
State/Seat
Alignment/Fastening
Alignment/State
State/Seat/Setting
State
State/Data plate
State/Seat
State/Seat
State/Seat
2 Safety windings
State
State
State/Fastening
State
Function/State
Function/State
State/Position
Stops and reverses
Door leaf stops at 20 kg
Safely distances
Function/State
Function/State
Function/State
Function/State
Function/State
Function/State
Function/State
complete/readable
complete/readable
complete/readable
Remarks
B-600 / B-800 / B-1000