Inhaltsverzeichnis
Werbung
Artikel 3 (2) Effiziente Nutzung des Funkspektrums
• ETSI EN 300 328
Breitband-Übertragungssysteme; Datenübertragungsgeräte, die im 2,4-GHz-ISM-Band
arbeiten und Breitband-Modulationstechniken verwenden; Harmonisierte Norm, die die
wesentlichen Anforderungen nach Artikel 3.2 der EU-Richtlinie 2014/53/EU enthält
• ETSI EN 302 065-2
Funkanlagen mit geringer Reichweite (SRD), die Ultraweitbandtechniken verwenden;
Harmonisierte Norm, die die wesentlichen Anforderungen nach Artikel 3.2 der EU-
Richtline 2014/53/EU enthält; Teil 2: Anforderungen an UWB-Lokalisierungsanwendungen
Hinweis
Die angegebenen Zulassungen gelten nur, wenn das entsprechende Zeichen auf dem
Gerät aufgedruckt ist.
FCC information
Siemens SIMATIC RTLS PCB OEM AC (6GT2700-8DF10-0AX1); FCC ID NXWOEMAC
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Caution
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Host labelling guidance for the end integrator
This is an advise for host manufacture to provide a physical / e-label on their host product
stating, "Contains FCC ID: NXWOEMAC":
A permanently affixed label must be used. The modular transmitter must be labeled with its
own FCC identification number, and, if the FCC identification number is not visible when the
module is installed inside another device, then the outside of the device into which the
module is installed must also display a label referring to the enclosed module. This exterior
SIMATIC RTLS PCB OEM AC
Betriebsanleitung, 07/2020, C79000-G8900-C519-03
Zulassungen
19
Werbung
Inhaltsverzeichnis
