Picture Adjustment Menu; Picture Mode; Contrast/Brightness/Colour/Hue/Sharpness; Colour Tone - Sony BRAVIA KDF-E50A11E Bedienungsanleitung

Picture Adjustment menu

Picture Adjustment

Picture Mode

Custom
Contrast Max
Brightness 50
Colour 50
Hue 0
Sharpness 15

Colour Tone

Warm

Reset

Noise Reduction

Auto

Iris

High
Select: Set: Back:
OK
Picture Mode
Selects the picture mode.
1
2

Contrast/Brightness/Colour/Hue/Sharpness

1
2
Colour Tone
1
2
End:
MENU
Press OK to select "Picture Mode".
Press m/M to select one of the following picture modes, then press OK.
• Vivid: For big lighted spaces.
• Standard: Optimal picture for home use.
• Custom: Allows you to store your own prefered settings.
Tip
You can change the picture mode by pressing
Press OK to select the option.
Press </, to set the level, then press OK.
Tip
"Hue" can only be adjusted for an NTSC colour signal (e.g., U.S.A. video tapes).
"Brightness", "Colour", "Hue" and "Sharpness" only appear and can be adjusted if "Picture Mode"
is set to "Custom".
Press OK to select "Colour Tone".
Press m/M to select one of the following, then press OK.
• Cool: Gives the white colours a blue tint.
• Neutral: Gives the white colours a neutral tint.
• Warm: Gives the white colours a red tint.
Tip
"Warm" only appears and can be adjusted if "Picture Mode" is set to "Custom".
You can select the options listed below on the Picture
Adjustment menu. To select options, see "Navigating
through menus" (page 19).
Tip
When you set the "Picture Mode" option to "Vivid" or
"Standard," you can adjust only "Contrast," and "Reset."
repeatedly.
Continued
21
GB