A d j u s t i n g t h e C o o k i n g
Duration Time:
This function is used to cook in the desired
time range. The foods to be cooked are
put into the oven. The oven is adjusted
to the desired cooking function. The oven
temperature is adjusted to the desired
degree depending on the dish to be
cooked. Touch on the "M" sensor until
you see Duration time symbol " |>| " on
the timer display screen. "AUTO" appear
on the display. Adjusted the cooking period
for the food you wish to cook, by using the
Timer Plus and minus sensor while the
timer is in this position. Some time after
the adjustment operation is completed,
the day's time will appear on the screen
and the Duration time symbol will begin
to continuously light on the screen.
At the completion of the set duration,
the timer will stop the oven and give
an audible warning. Also, "AUTO" will
begin to flash on the screen. Touching
any sensor of the control unit will end
the audible warning. "AUTO" will go on
to flash. Touch " - " and " + " symbols at
the same time to finish "AUTO" mode.
Adjusting the Cooking End Time:
This function is used to cook after a certain
period of time, within certain duration.
The food to be cooked is put into the
oven. The oven is adjusted to the desired
cooking function. The oven temperature is
adjusted to the desired degree depending
on the dish to be cooked.
Touch on the "M" sensor until you see
Duration time symbol " |>| " on the timer
display screen. "AUTO" appear on the
display. Adjusted the cooking period for
the food you wish to cook, by using the
Timer Plus and minus sensor while the
timer is in this position.Then touch the
"M" sensor until you see " >| " symbol.
the day time will begin to flash, with the
addition of the cooking period. Adjust the
finishing time for the food by using the
Timer Plus and minus sensor while the
timer is in this position. Some time after
the adjustment operation is completed,
the day time will appear on the screen and
the " >| " symbol will begin to continuously
light on the screen. The oven will start
operating at the time calculated by
deducting the cooking period from the
set finishing time, and will stop at the
set finishing time. The timer will give an
audible warning and "AUTO" will begin
to flash on the screen will begin to flash.
Touching any button of the timer will end
the audible warning. "AUTO" will go on
to flash. Touch " - " and " + " symbols at
the same time to finish "AUTO" mode.
Digital Timer Sound Adjustment:
Touch "-" sensor until you hear sound.
timer will give an audible signal beep. After
that each time "-" sensor is touched, timer
will give three different types of signal
beep. Do not touch any further sensor
and timer will save the last selected signal
type.
Key Lock Function
The key lock function is used to prevent
operating any functions of the control
unit by mistake. Touch "+" sensor until
you see key lock symbol on the display
to activate key lock. Touch the "+" sensor
to deactivate key lock.
EN - 14