Dometic PERFECTCHARGE MCA1215 Montageanleitung Und Bedienungsanleitung Seite 48

Installing the device
NOTICE!
A
Before drilling any holes, make sure that no electrical cables or
other parts of the vehicle can be damaged by drilling, sawing and
filing.
For installation and mounting you will need the following tools:
 Pen for marking
 Drill bit set
 Drill
 Screwdriver
To secure the device in place you will need:
 Machine bolts (M4) with washers and self-locking nuts or
 self-tapping screws or wood screws.
Fasten the device as follows:
➤ Hold the device against the installation location.
➤ Mark the fastening points.
➤ Fasten the device with one screw through each hole in the holders.
48
MCA1215 – MCA2440
EN