Franke FME 407 XS Bedienungsanleitung Und Installation Seite 17

USE
Button Function
Turns the lights ON/OFF at maximum
L
intensity.
Press and hold the button for approximately 4
seconds, with all the loads turned off (Motor
and Lights), to turn the Activated Charcoal
Filter alarm on/off.
T1 Turns the motor on/off at speed one.
Press and hold the button for approximately 2
seconds, with all the loads turned off (Motor
and Lights), to reset the Activated Charcoal
Filter alarm.
S1 Signals the Metal Grease Filter saturation
alarm, indicating that it is necessary to wash the
filters. The alarm is triggered after the Hood
has been in operation for 100 working hours.
When this is activated, it signals the Activated
Charcoal Filter saturation alarm, indicating that
the filter must be changed; the Metal Grease
Filters must also be washed. The Activated
Charcoal Filter saturation alarm comes into
operation after the Hood has been working for
200 hours.
EN
Control panel
S1
L T1
Led
-
LED S1 flashes twice = alarm
ON.
LED S1 flashes once = alarm
OFF.
-
LED S1 turns OFF (Fixed or
Flashing).
Fixed
Flashing
1
17