Operating Elements & Connections - Omnitronic KM Serie Bedienungsanleitung

4
OPERATING ELEMENTS & CONNECTIONS
1 LEVEL control
For adjusting the volume of the input signal.
2 POWER indicator
3 SIG/LIM indicator
Lights up green as input signal indicator and red when the signal level is too high; the limiter will
reduce the signal level to protect the speakers. If this LED lights up red frequently, reduce the
volume of the input signal accordingly.
4 Power switch
5 Voltage selector switch
6 LINE input
Balanced combo input (XLR/6.3 mm jack) for connecting audio units with line level (e.g. mixer, CD
player).
7 Feed-through output LINK
Balanced XLR jack, connected in parallel to the input, to connect another device, e.g. a further
active stage monitor.
Ground lift selector switch
8
• Switch engaged: signal ground and housing ground are separated
• Switch disengaged: signal ground and housing ground are connected
9 MONITOR/FOH selector switch
To select various equalizer presets according to your application:
• Switch engaged FOH: for use as PA speaker (front of house)
• Switch disengaged MONITOR: for use as stage monitor with the low bass range attenuated
10 Fuse
Only replace the fuse when the device is disconnected from mains. Only use fuses of the same
rating and power. The correct fuse value is specified on the rear panel.
11 Power input
Plug in the supplied power cable here.
Downloaded from www.Manualslib.com manuals search engine
15