Heidolph Hei-VAP Precision Originalbetriebsanleitung Seite 66

Connect Woulff bottle
➜ Unscrew the threaded fitting from the
Woulff bottle.
➜ Remove the hose clamp ring.
➜ Place the enclosed PTFE tube section in
the cap nut and tighten the cap nut.
➜ Push the threaded fitting on the PTFE
tube.
➜ Push on the hose clamp ring.
➜ Connect to the Woulff bottle with the
threaded fitting.
✓ The vacuum valve and Woulff bottle
are connected.
➜ Attach the connected Woulff bottle and
the vacuum valve with the mounting
brackets and two screws to the base
unit.
Downloaded from www.Manualslib.com
Assembly
manuals search engine
Hose clamp ring
Cap nut
PTFE tube
Screws
66
Threaded fitting
Mounting brackets