Powerfunction And Super Power Function; Timer - Novy 1724 Montageanleitung Und Bedienungsanleitung

Powerfunction and Super Power function

The Power function [ P ] and the Super Power [
heating zone.
If this function is activated the heating zones work during 10 minutes with an ultra high power.
Power is foreseen for example to heat up rapidly big quantities of water, like nuddles
 Start up / Stop the booster Power function:
Action
Zone selection
Start up the Power
Stop the Power

Start up / Stop the double booster function:
Action
Selection of the zone
Start up Power
Start up Super Power
Stop the Super Power
Stop Power

Power management:
The hole cooking hob is equipped with a maximum of power. When the Power function is
activated, and in order to exceed the maximum power, the electronic system orders to reduce
automatically the power level of an other heating zone. The display is blinking on [ 9 ] during a
few seconds and then shows the maximum of power allowed :
Heating zone selected
[ P ] is displayed

Timer

The timer is able to be used simultaneous with all 4 heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.

Setting and modification of the cooking time :
Example for 16 minutes at power 7 :
Action
Zone selection
Select the power level
Select « Timer »
Set the units
Valid the units
Set the tens
Valid the tens
The time is confirmed and the cooking starts.
] grants a boost of power to the selected
Control panel
Press key [ 0 ] from the zone
Press key [ P ]
Slide on the "SLIDER"
Control panel
Press key [ 0 ]
Press key [ P ]
Re-press key [ P ]
Press key [ P ]
Slide on the "SLIDER"
The other heating zone:
[ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone
Control panel
Press display [ 0 ] selected
Slide on the "SLIDER" to [ 7 ]
Press display [ CL ]
Slide on the "SLIDER" to [ 6 ]
Press display [ 06 ]
Slide on the "SLIDER" to [ 1 ]
Press display [ 16 ]
52
Display
[ 0 ] and control light on
[ P ]
[ 9 ] to [ 0 ]
Display
[ 0 ]
[ P ]
[ and P ]
[ P ]
[ 9 ] to [ P ]
(example: power level 9)
Display
[ 0 ] and control light on
[ 7 ]
[ 00 ]
[ 0 fixed ] [ 6 blinking ]
[ 0 blinking ] [ 6 fixed ]
[ 1 blinking ] [ 6 fixed ]
[ 16 ]