Manual Control - Boneco H400 Anleitung

MANUAL HANDLING (CONTINUED)

MANUAL CONTROL

1. Briefly press the knob once to switch on the BONECO
appliance.
The appliance is always in AUTO mode when it is
switched on.
2. Adjust the output to your needs by setting the knob to
the desired level from 1 to 6. This action exits AUTO
mode (AUTO LED is off).
The selected performance level is indicated by the num-
ber of LEDs that light up above the knob.
3. Briefly press the knob once to exit manual mode and
to reactivate AUTO mode.
4. Briefly press the knob once more to switch off the
BONECO appliance.
If you exit AUTO mode, the BONECO appliance will
continue at the selected performance level until the
water base is empty, regardless of what the current
level of humidity is.
33
en