Use Buckle - Joie Snacker 2in1 Anleitung

WARNINGS
! Read all the instructions in this manual before using this product.
! Adult assembly required.
! Never leave the child unattended.
! Always use the restraint system.
! Falling hazard: Prevent your child from climbing on the high chair.
! Do not use the product unless all components are correctly fitted and adjusted.
! Be aware of the risk of open fire and other sources of strong heat in the vicinity of the product.
! Be aware of the risk of tilting when your child can push its feet against a table or any other structure.
! Please keep instruction manual for future reference.
! Keep children away when unfolding and folding the product to avoid injury.
! This product is intended for children able to sit up unaided and up to 3 years or a maximum weight of
15kg.
! Failure to follow these warnings and the assembly instructions could result in danger.
! DO NOT make any modification to this highchair or use it along with component parts from other
manufacturers.
! DO NOT use the highchair if any parts are broken, torn or missing.
! To prevent serious injury or death from falling or sliding out, always secure child in the restraint.
! Secure your child at all times with the restraint system provided, either in the reclining or upright
position. The tray is not designed to hold your child in the product.
! It is recommended that the product be used in the upright position only by children capable of sitting
upright unassisted.
! DO NOT allow your child to stand in or on the highchair.
! DO NOT lift and carry highchair while occupied.
! DO NOT allow children to play with or around highchair while occupied.
! DO NOT allow children to lean over sides of highchair. It may become unbalanced and tip over.
! DO NOT place any heavy bags, packages, or other items on the highchair tray. They may cause the chair
to tip over.
! Always use on a flat and level floor.
! To avoid strangulation hazard, DO NOT place product in any location where there are cords, such as
window blind cords, drapes, phone cords, etc.
! All assembly fittings should be unfolded completely and tightened properly before using the product.
! Regularly check the locks and fittings for security.
! Regularly inspect the product for damaged hardware, loose joints, missing parts or sharp edges.
! Remove your child from product before folding or adjusting the highchair.
! Make sure the product has been folded or unfolded completely before letting your child approach the
highchair.
! Consult the distributor for issues concerning maintenance, repair and part replacement.
! DO NOT place food that is hot enough to burn child's skin on the tray.
! Make sure that any harness is correctly fitted.
! Do not use the high chair until the child can sit up unaided.
! To avoid suffocation, remove plastic bag and packaging materials before using this product. The plastic
bag and packaging materials should then be kept away from babies and children.
! Make sure the safety harness is correctly fitted.
! To prevent serious injury or death from falling or sliding out, always use the restraint system and ensure
it is correctly fitted.
9
Assemble Highchair
see images -
1 4
Please read all the instructions in this manual before assembling and using this product.
1. Align the tubes of leg assembly with those of seat assembly, and then insert to assemble. A click means
both the two tubes are assembled properly. 1
! Please check the legs are assembled well by pulling them apart.
2. Using the button on the back of the seat to open the highchair by rotating the backrest upwards
"click" means the backrest is locked completely.
! Please confirm the recline wire and seat latch slot are fully engaged before use.
! If they are not correctly engaged, please fold the unit as
3. Please attach basket to the support leg by 4 pairs of webbings
basket.
4. Place the tray over tray bar 3 while pulling the button on both sides under the tray outward
"click" is heard. The assembled highchair is shown as

Use Buckle

see images -
5 6
Note
1. To avoid serious injury from falling or sliding out always secure your child with harness.
2. Make sure your child is snugly secured and that the space between the child and the shoulder
harness is about the thickness of one hand.
3. DO NOT cross the shoulder belts. This will cause pressure on child's neck.
Adjust Shoulder and waist Harnesses
see images -
7 10
Note
1. The shoulder harness must go into the slot that is even with or slightly above the shoulders.
2. In order to protect your child from falling out after your child is placed into the seat check whether
the shoulder harnesses are at proper height.
3. For larger child use the upper shoulder slots. For smaller child use the lower shoulder slots.
Choose a pair of proper shoulder slots, thread shoulder harnesses out off previous slots
into desired slots in seat pad and seat back.
8 9
! When changing shoulder harness slots, make sure shoulder harnesses are going through same
slots in seat pad and seat back.
Use slide adjuster to change the harness length 10
to proper length. -3
10
2
-2
2
15 and repeat the above operation.
2 -3. Pull webbings upwards to remove
3 -1until a
4
, and then insert
7
-1, press the button 10 -2 while pulling the waist harness
. a
10