Changing The Temperature; After Use; User Maintenance - Cole Parmer № ICE Sicherheits- Und Installationsinformationen

chaNgINg the temperature uNIts
The temperature of the display can be shown in either ºC or ºF.
1. To change the temperature units, first turn
the power to the unit OFF.
2. Switch the power to the unit ON whilst
holding down the UP ARROW button.
3. The temperature unit selection screen will
then be displayed. Release the UP ARROW
button and then press it again to toggle
between ºC and ºF.
4. Once the required temperature unit has been selected, after a short time the unit will
automatically show the current temperature in the selected units.

after use

After cooling samples, the bucket and beads may be very cold. Allow to warm to ambient conditions
before lifting from the unit or wear protective gloves. Avoid handling cold objects with wet hands.

user maINteNaNce

Before cleaning the unit, disconnect it from the power supply. The outer case of the Nº ICE may be wiped
clean with a damp cloth; ethanol, methanol or formaldehyde can also be used. No part of the case or cover
should be immersed in the solvents. Do not use aggressive solvents such as acetone or abrasive cleaners.
Allow the unit to dry before using.
Before using any cleaning or decontamination method except those recommended here, the responsible
person should check with Techne that the proposed method will not damage the equipment.
19
Nº ICE Nº ICE Nº ICE Nº ICE