Herunterladen Diese Seite drucken

Mottez A014PCAD Bedienungsanleitung Seite 13

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 17
ENGLISH
ADAPT YOUR DRIVING
- Every time the cycle carrier is used, check before departure and regularly during the journey that
everything is properly tight (screws, knobs, straps, etc.).
The fixings for the bicycles and the cycle carrier must be checked after fitting and regularly during the
journey. Re-tighten if necessary.
IMPORTANT: Your vehicle is now longer, higher and wider. Take this into account when manoeuvring.
- Drive with care: any load carried behind a vehicle affects its behaviour (turning, crosswinds, road
surface, reversing, tight turns, etc.).
- Reduce your speed, especially when turning or passing obstacles and be aware of increased braking
distances.
- Do not use the cycle carrier off-road or on bumpy roads: excessive shaking could damage your cycle
carrier and your vehicle.
YOU ALONE ARE RESPONSIBLE FOR INCORRECT USE OF FAILURE TO FOLLOW
INSTRUCTIONS.
- Do not raise the vehicle's tailgate when the cycle carrier is fitted.
- It is recommended that you remove the cycle carrier after use, in order not to inconvenience
pedestrians or other motorists.
- Never leave the cycle carrier attached to the vehicle in automated car washes, especially roller
washes.
- Keep and maintain the cycle carrier in good condition, store it suitably, rolling up the straps.
15 - Visibility:
- The number plate and lights must remain visible. If they are partially obscured: fit a complete
indicator bar with lights.
- Your number plate must comply with the Highway Code.

Werbung

loading