External Speaker Jack - GPO EMPIRE Bedienungsanleitung

EXTERNAL SPEAKER JACK

To play with external speakers, connect the external speaker wires to
the external speaker jack, which locate at the back of the unit
INTERNAL SPEAKER ON/OFF SWITCH
To select playback from internal speaker, slide the switch to "On"
position.
WARNING! RISK OF HEARING DAMAGE
• Set a low volume on the playback device before you connect the
headphones to the sound source.
• Avoid excessive volumes, particularly over extended periods or in
the case of frequent use. Excessive volume can result in permanent
hearing damage.
RE-MARK:
ERP2 mode: When the unit does not receive any Audio signal from
Phono and Line-in in around 10 minutes, the unit will automatically
enter standby mode. In order to re-activate the unit, please turn off the
unit and turn on again to resume normal operation.
GPO_EMPIRE_Manual EU - Dec 2017_v1.indd 19
Downloaded from www.Manualslib.com manuals search engine
19
07/12/2017 21:53